Leírás
DIY KIT 3.3V/5V kerámia piezo vibrációs érzékelő modul analóg vezérlő elektronikai alkatrészek Érzékelő kellékek Arduino UNO R3-hoz
DIY KIT 3.3V/5V Ceramic Piezo Vibration Sensor Module Analog Controller Electronic Components Supplies Sensor for Arduino UNO R3
When the piezoelectric ceramic shocking will generate an electrical signal, for Arduino Controller analog port can be perceived slight vibration signals, Also can be realized with vibration interactions related works, such as electronic drums.
Specification:
1.Model:011
2.Name:Ceramic Piezo Vibration Piece Sensor
3.Working Voltage: 3.3V or 5V
4.Working Current: <1mA
5.Operating Temperature Range: -10 ~ 70
6.Interface Type: Analog Output
7.Item Size: 30mm x 23mm
8.GPIO: S; signal output, ; power supply (VCC), -; ground (GND)
9.Input: Positive electrode of the piezoelectric ceramic
10.GND: Negative electrode of the piezoelectric ceramic
When the piezoelectric ceramic shocking will generate an electrical signal, for Arduino Controller analog port can be perceived slight vibration signals, Also can be realized with vibration interactions related works, such as electronic drums.
Specification:
1.Model:011
2.Name:Ceramic Piezo Vibration Piece Sensor
3.Working Voltage: 3.3V or 5V
4.Working Current: <1mA
5.Operating Temperature Range: -10 ~ 70
6.Interface Type: Analog Output
7.Item Size: 30mm x 23mm
8.GPIO: S; signal output, ; power supply (VCC), -; ground (GND)
9.Input: Positive electrode of the piezoelectric ceramic
10.GND: Negative electrode of the piezoelectric ceramic
When the piezoelectric ceramic shocking will generate an electrical signal, for Arduino Controller analog port can be perceived slight vibration signals, Also can be realized with vibration interactions related works, such as electronic drums.
Specification:
1.Model:011
2.Name:Ceramic Piezo Vibration Piece Sensor
3.Working Voltage: 3.3V or 5V
4.Working Current: <1mA
5.Operating Temperature Range: -10 ~ 70
6.Interface Type: Analog Output
7.Item Size: 30mm x 23mm
8.GPIO: S; signal output, ; power supply (VCC), -; ground (GND)
9.Input: Positive electrode of the piezoelectric ceramic
10.GND: Negative electrode of the piezoelectric ceramic
When the piezoelectric ceramic shocking will generate an electrical signal, for Arduino Controller analog port can be perceived slight vibration signals, Also can be realized with vibration interactions related works, such as electronic drums.
Specification:
1.Model:011
2.Name:Ceramic Piezo Vibration Piece Sensor
3.Working Voltage: 3.3V or 5V
4.Working Current: <1mA
5.Operating Temperature Range: -10 ~ 70
6.Interface Type: Analog Output
7.Item Size: 30mm x 23mm
8.GPIO: S; signal output, ; power supply (VCC), -; ground (GND)
9.Input: Positive electrode of the piezoelectric ceramic
10.GND: Negative electrode of the piezoelectric ceramic
When the piezoelectric ceramic shocking will generate an electrical signal, for Arduino Controller analog port can be perceived slight vibration signals, Also can be realized with vibration interactions related works, such as electronic drums.
Specification:
1.Model:011
2.Name:Ceramic Piezo Vibration Piece Sensor
3.Working Voltage: 3.3V or 5V
4.Working Current: <1mA
5.Operating Temperature Range: -10 ~ 70
6.Interface Type: Analog Output
7.Item Size: 30mm x 23mm
8.GPIO: S; signal output, ; power supply (VCC), -; ground (GND)
9.Input: Positive electrode of the piezoelectric ceramic
10.GND: Negative electrode of the piezoelectric ceramic
When the piezoelectric ceramic shocking will generate an electrical signal, for Arduino Controller analog port can be perceived slight vibration signals, Also can be realized with vibration interactions related works, such as electronic drums.
Specification:
1.Model:011
2.Name:Ceramic Piezo Vibration Piece Sensor
3.Working Voltage: 3.3V or 5V
4.Working Current: <1mA
5.Operating Temperature Range: -10 ~ 70
6.Interface Type: Analog Output
7.Item Size: 30mm x 23mm
8.GPIO: S; signal output, ; power supply (VCC), -; ground (GND)
9.Input: Positive electrode of the piezoelectric ceramic
10.GND: Negative electrode of the piezoelectric ceramic
When the piezoelectric ceramic shocking will generate an electrical signal, for Arduino Controller analog port can be perceived slight vibration signals, Also can be realized with vibration interactions related works, such as electronic drums.
Specification:
1.Model:011
2.Name:Ceramic Piezo Vibration Piece Sensor
3.Working Voltage: 3.3V or 5V
4.Working Current: <1mA
5.Operating Temperature Range: -10 ~ 70
6.Interface Type: Analog Output
7.Item Size: 30mm x 23mm
8.GPIO: S; signal output, ; power supply (VCC), -; ground (GND)
9.Input: Positive electrode of the piezoelectric ceramic
10.GND: Negative electrode of the piezoelectric ceramic
When the piezoelectric ceramic shocking will generate an electrical signal, for Arduino Controller analog port can be perceived slight vibration signals, Also can be realized with vibration interactions related works, such as electronic drums.
Specification:
1.Model:011
2.Name:Ceramic Piezo Vibration Piece Sensor
3.Working Voltage: 3.3V or 5V
4.Working Current: <1mA
5.Operating Temperature Range: -10 ~ 70
6.Interface Type: Analog Output
7.Item Size: 30mm x 23mm
8.GPIO: S; signal output, ; power supply (VCC), -; ground (GND)
9.Input: Positive electrode of the piezoelectric ceramic
10.GND: Negative electrode of the piezoelectric ceramic
4000785353530 – sitai
